CP Electronics MWS1A-PRM White Wall Mounting Microwave Presence Detector With 15 Sec - 30 Min Time Delay Function & 30m Detection Range 10A

CP Electronics MWS1A-PRM White Wall Mounting Microwave Presence Detector With 15 Sec - 30 Min Time Delay Function & 30m Detection Range 10A

The MWS1 series of microwave presence detector switches are designed to provide automatic control of lighting, heating or ventilation loads. The MWS1 detects movement using a highly sensitive microwave detector. This works by emitting low power microwave signals and measuring the reflections as the signals bounce of moving objects. The MWS1 is optimised for wall mounting applications to give detection over long distances.

When movement is detected the load is turned on. When an area is no longer occupied the load will switch off after an adjustable time out period.

 

An optional internal light sensor provides additional energy saving in lighting applications (MWS1/LUX). When an area is occupied lighting is only switched on when the level of natural light is below a preset level.

 

LOAD

10A of lighting and or ventilation including incandescent, fluorescent, compact fluorescent, low voltage (switch primary of transformer).

 

SUPPLY VOLTAGE 220-240 Volts AC 50 Hz

TIME OUT PERIOD Adjustable 15 seconds to 30 minutes.

LIGHT LEVEL Optional adjustment by thumbwheel light to dark.

FIXING METHOD Surface fixing 25mm deep plastic surface mount moulded box. Flush fixing 25mm steel wall box or 32mm deep cavity wall box.

TERMINAL CAPACITY 4.0mm²

MATERIAL Flame retardant ABS

TYPE Class 2

TEMPERATURE -10°C to 35°C

SAFETY The microwave radiation emitted by these units is exteremely low power.

At a distance of > 50mm the power density is <6% of the ANSI IEEE

C95.1 –1991 recommended microwave power density.

At a distance of 5mm from the unit it is <84% of recommended power density.

CONFORMITY EMC-89/336/EEC, LVD-73/23/EEC