CP Electronics DD-LCDHS Programming Handset For PRM & Direct Dimming Models Only

CP Electronics DD-LCDHS Programming Handset For PRM & Direct Dimming Models Only

Our programming handset is available in two versions, the standard model for conventional height ceilings and the ‘LR’ version for use in high ceiling applications such as warehouses.

The handsets allow programming and control of all Direct Dim functionality including:

• switching and dimming channel control

• detection sensitivity

• lux hold-off and time delay

• step-down illuminance

• scene settings

• lamp burn-in settings

 

Battery 4 x 1.5Vdc AA

Temperature 0ºC to 35ºC

Compliance EMC-2004/108/EC, LVD-2006/95/EC

 

The DD-LCD-HS is the programming tool for all products in the –DD (Direct Dim), -PRM (PRM) and MWS7 ranges.

 

On button

To turn the unit on press the ‘on’ button. This button is also used for selecting parameters and then sending to the device being programmed.

Up, down. Left and right buttons

Use to navigate through the menus. The up and down buttons are also used for selecting values or toggling between on / off, yes / no etc. To turn the unit off, either select the final main menu item or the unit will turn off after 30 seconds.

Menu selection

Use the < > buttons to scroll through the menus. Press ‘on’ to select.

Parameter selection

Use the < > buttons to scroll through the menus. Press ‘on’ to select menu. Use the up and down buttons to select values or toggle between on / off, yes / no. Press ‘on’ to send parameter to device.